Product Description
3DOF CONFIGURATION
QS-220-PL Extended Set consisting of four actuators, two power cabinets, and one motion controller. The 3DOF configuration is dedicated to all racers who expect the most realistic and precise simulation. Incredible levels of vehicle feedback to the driver allow feeling exactly what the vehicle is doing in real-time. During the competition, drivers can feel every possible detail noticeable in a real race (including motor vibrations, road surface, bumps, shunting effects, etc.) Due to the 3DOF set, you can feel like at a real racing session directly from your home.
QS-220-PL SET HIGHLIGHTS
Maximum velocity: 800 mm/s
Maximum acceleration: 0.8 G
Actuator stroke: 100 mm
Latency: <8 ms
Maximum control frequency: 1000 Hz
Vibration frequency range: 0-100 Hz
QS-220-PL SET KEY FEATURES
Proudly made in EU: Engineered, Designed and Manufactured in Poland
Used by professional race car drivers and pilots around the world
Top-quality ecosystem for personal and commercial applications
Supported by dedicated software QubicManager: motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles
VR HeadWay technology support (VR sickness compensation)
Over 80+ integrated and supported racing and flight games
Compatible with professional simulation applications – Motion SDK (FSMI or FSDI) for software developers
Box 1. QS-220-PL motion set:
2x QS-L1 – linear actuator with cup holder
1x QS-SB2 – power cabinet (control module)
1x QS-SBML-2 – motion lock cable (up-link/down-link) – 2 m long
1x Power cable
Box 1. Dimensions
71 cm x 53 cm x 16 cm | 27.9 in x 20.9 in x 6.3 in
Box 1. Weight
30 kg| 66.14 lb
Box 2. QS-MC6 controller set:
1x QS-SBML-1 – motion lock with additional 2 m long cable
1x QS-MBT-1 – M-BUS terminator
1x USB cable – 0,5 m long cable (USB micro B)
1x CAT.5E patch cord cable – 2 m long
Box 2. Dimensions
20 cm x 20 cm x 13 cm | 7.9 in x 7.9 in x 5.1 in
Box 2. Weight
1 kg | 2.2 lb
GENERAL SPECIFICATION OF QS-220-PL SET
Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
Actuator stroke: 100 mm | 3.93 in
Maximum velocity:
◦ Q-Mode (230V): 800 mm/s
◦ Performance Mode (115V/230V): 400 mm/s
◦ Heavy Duty Mode (115/230V): 300 mm/s
Maximum acceleration:
◦ Q-Mode (230V): 0.8G*
◦ Performance Mode (115V/230V): 0.7G*
◦ Heavy Duty Mode (115/230V): 0.4G*
*value of acceleration is limited for safety reasons
Recommended payload in 3DOF (2x QS-220-PL) configuration:
◦ Q-Mode: 200 kg
◦ Performance Mode: 250 kg
◦ Heavy Duty Mode: 350 kg
Vibrations frequency range: 0-100 Hz
Maximum control frequency: 1000 Hz
Latency: <8 ms
Product weight: 30 kg | 66 lb
MAIN DIMENSIONS
Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
Cable length (QS-L1 actuator – QS-SB2 Power cabinet): 1150 mm | 45.2 in
POWER REQUIREMENTS
Power supply requirements: 115/230 VAC Single Phase
Average power consumption in 3DOF configuration:
◦ Q-Mode: 260W (230V)
◦ Performance Mode: 280W (230V), 270W (115V)
◦ Heavy Duty Mode: 436W (230V), 462W (115V)
Peak current for breaker specification in 3DOF configuration:
◦ Q-Mode: 5.17A (230V)
◦ Performance Mode: 4.55A (230V), 7.35A (115V)
◦ Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
Connection: USB
While every reasonable effort is made to ensure the accuracy of this information, we apologize for any errors or omissions contained on these pages.
Please verify any information with Simulation 1 Systems.
Reviews
There are no reviews yet.